Updated November 2026

A Barkshire dog playpen with 8 panels gives a puppy a safe, open enclosure that can be shaped into a square, rectangle or wider area. This guide walks you through checking the size, assembling the panels, securing the pen and setting it up so your puppy has room to move without room to get into trouble.

Step 1: Measure Your Space and Your Puppy

Start by measuring the floor area where the playpen will go. An 8-panel pen can be configured in several footprints, so decide on the shape before you connect anything. Leave at least a foot of clearance around the outside for door swing and for you to reach in comfortably.

Shopping for one? See our guide: 4 Best Pop Up Dog Playpen Options for Indoor and Outdoor Use.

Next, think about your puppy’s adult size, not just the size today. A pen should give enough space for a bed, a water bowl and a separate potty zone. Many owners find that a footprint of roughly 4 to 6 feet on each side works well for a young puppy, but check the manufacturer’s dimension chart for the exact panel width and height.

Step 2: Assemble the Panels Correctly

Lay all eight panels flat and check each one for bent wire or loose hinges before you start. Connect the panels in the order and orientation shown in the instructions, and make sure the locking clips or hinges click fully into place. A panel that looks connected but is not fully locked can shift when your puppy leans on it.

Once the pen is closed into its final shape, walk around the outside and push on each joint. If any section wobbles or gaps open up, tighten or re-seat that connection.

Step 3: Anchor and Position the Pen

Place the pen on a flat, level surface. Indoors, keep it away from curtains, cords, furniture your puppy can climb and heating vents. Outdoors, check that the ground is firm and not prone to puddling or washing out.

Some owners add weight or stakes to stop lightweight panels from sliding on hard floors. Where a pen will sit on tile or laminate, a non-slip mat underneath helps keep the panels from walking apart.

Setup Checklist

  1. Measure the floor space and leave clearance for the door.
  2. Lay out all eight panels and check for damage.
  3. Connect the panels in the manufacturer’s order and confirm each lock is seated.
  4. Shake each joint to test stability.
  5. Position away from cords, furniture and heat sources.
  6. Add a bed, water and a potty area sized to the pen.
  7. Watch your puppy inside the pen for the first hour to see whether it shifts or tips.

Common Mistakes to Avoid

  • Choosing a footprint that is too small for a puppy who will grow.
  • Leaving a joint partly locked, which can open up under pressure.
  • Placing the pen where a curious puppy can reach electrical cords.
  • Setting up on slick floors without any way to stop panels from sliding.
  • Leaving the pen unattended outdoors without checking weather exposure.

A non-slip mat helps keep the panels from drifting on hard floors, which is useful when a puppy pushes against one side. View on Amazon

A washable pet bed sized to the pen gives your puppy a clear resting spot away from the potty area. View on Amazon

A pen cover can shade the enclosure outdoors and cut down on drafts indoors, though it is worth weighing its drawbacks. View on Amazon

FAQ

Is an 8-panel Barkshire pen tall enough for a puppy?

Height depends on your puppy’s breed and jumping ability. Check the panel height in the manufacturer’s specs and compare it to your puppy’s expected adult size.

Can I use the pen outdoors?

Many owners do, but make sure the ground is level and the pen is secured against wind. Consult the manufacturer’s guidance on outdoor use before leaving your puppy unattended.

How do I know if the panels are locked correctly?

Each joint should click or seat fully with no visible gap. Push firmly on every section; if anything moves or separates, re-seat it before letting your puppy inside.

Conclusion

A well-measured and properly locked 8-panel pen gives your puppy a secure space to rest, play and learn. Take the time to check the footprint, joints and placement before the first use. For related setup ideas, see What to Put in Dog Playpen: A Step-by-Step Setup Guide for Puppies and Non Slip Mat for Dog Playpen: How to Choose and Secure One (2026).

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our dogs & puppies guides, checking product details against manufacturer specifications and owner feedback.