Updated November 2026

Learning how do you fold a dog crate takes about a minute once you know the sequence. Most folding wire crates collapse by releasing a few latches, lowering the top and sliding the side panels together, while soft-sided crates fold flat along pre-set seams. This guide walks through both styles so you can fold, store and set up your crate again without damaging the frame or hurting yourself.

Before You Start: Clear the Crate and Check the Latches

Remove the bed, bowls, pads and any toys first. A pad or blanket caught in a hinge can bend the frame or make the panels stick. Then check the floor tray. If your model has a removable tray, pull it out and set it aside so it does not pinch you when the crate closes.

Shopping for one? See our guide: How to Crate Train a Dog: 5 Best Crates for Training (2026). For a deeper look, How to Introduce a New Cat to Dogs Safely and Calmly covers this in detail.

Next, locate every latch. Wire crates usually have two to four latches on the door, the tray clips and the side hinges. Soft-sided crates often use a zipper, velcro strips or a flat locking clip at the base.

How to Fold a Wire Dog Crate

Most wire crates follow the same basic order. Read the manufacturer’s manual first, since latch locations differ between brands.

  1. Open the door and release the door latch so it swings freely.
  2. Remove the floor tray if it is detachable.
  3. Press the tab or latch on the top corner of each side panel and lower the top panel toward the floor.
  4. Release the side hinges one at a time, keeping one hand on the panel as it moves.
  5. Fold the sides inward so they sit flat against the bottom panel.
  6. Secure the folded unit with any strap or clip the crate includes.

Keep Your Fingers Clear of the Hinges

Wire hinges pinch fast. Keep your fingers on the outside edges of the panels and never place your hand between two moving sections. Fold slowly, especially the first time.

How to Fold a Soft-Sided Dog Crate

Soft-sided crates rely on a metal or plastic frame inside the fabric. The frame usually comes out or collapses, and the fabric wraps around it.

  • Unzip or unhook the door and any side access panels.
  • Unclip the frame at the corners or top, then release the tension bars.
  • Bring the top and sides together, following the stitched fold lines.
  • Store the frame pieces inside the fabric pouch so nothing gets lost.

Do not force a fabric crate flat if a bar will not release. Forcing it can tear seams or bend the frame. Check the tension clips again.

Storing and Setting Up the Crate Again

Store a folded crate in a dry place away from heavy items. A bent panel will not latch properly, so keep it upright or lying flat against a wall rather than under something heavy. When you set it up again, reverse the steps: unfold the sides, lock each hinge until it clicks, attach the top and reinsert the tray. Test every latch before your dog goes inside.

Common Mistakes to Avoid

  • Folding without removing the tray, which can jam the hinges.
  • Leaving bedding inside, which can catch in the panels.
  • Pulling one side panel while the other is still locked.
  • Storing the crate where a wet floor or damp garage can rust wire parts.
  • Skipping the latch check after reassembly, which can let a dog push a panel loose.

A few simple items make folding and storage easier:

  • Crate-fit washable pad: Easy to remove before folding, so nothing gets trapped in the panels. View on Amazon
  • Heavy-duty crate cover: Keeps a folded crate clean and dust-free in storage. View on Amazon
  • Replacement crate clips or latch kit: Useful if a latch wears out and stops holding the folded frame. View on Amazon

FAQ

Can I fold a dog crate with my dog inside?

No. Your dog should be outside the crate and supervised while you fold it. Moving panels can startle a dog or cause injury.

Why will my wire crate not fold flat?

A bent panel, a stuck latch or a bedding pad caught in a hinge usually causes this. Remove everything inside and check each hinge before forcing anything.

Where should I store a folded dog crate?

Keep it in a dry, indoor space such as a closet, basement shelf or garage corner that does not flood. Avoid stacking heavy objects on it.

Conclusion

Once you know how do you fold a dog crate for your model, the process takes only a few minutes. Work slowly around the hinges, remove the tray and bedding first, and check every latch when you set it back up. If a hinge or frame part breaks, contact the manufacturer or a qualified pet supply professional before using the crate again.

Audrey Hayes

About Audrey Hayes

Audrey Hayes is part of our editorial team and reviews and edits our dogs & puppies guides, checking product details against manufacturer specifications and owner feedback.